高级检索
    魏星, 陈刘成, 朱文婕, 刘玉文, 陈玉娥. 离散曲率边折叠简化算法用于骨骼CT图像三维重建及VTK实现[J]. 蚌埠医科大学学报, 2015, 40(11): 1554-1557. DOI: 10.13898/j.cnki.issn.1000-2200.2015.11.031
    引用本文: 魏星, 陈刘成, 朱文婕, 刘玉文, 陈玉娥. 离散曲率边折叠简化算法用于骨骼CT图像三维重建及VTK实现[J]. 蚌埠医科大学学报, 2015, 40(11): 1554-1557. DOI: 10.13898/j.cnki.issn.1000-2200.2015.11.031
    shu
    WEI Xing, CHENG Liu-cheng, ZHU Wen-jie, LIU Yu-weng, CHENG Yu-e. The three-dimensional reconstruction of bone CT image using simplification algorithm of edge collapse based on discrete curvature and VTK implementation[J]. Journal of Bengbu Medical University, 2015, 40(11): 1554-1557. DOI: 10.13898/j.cnki.issn.1000-2200.2015.11.031
    Citation: WEI Xing, CHENG Liu-cheng, ZHU Wen-jie, LIU Yu-weng, CHENG Yu-e. The three-dimensional reconstruction of bone CT image using simplification algorithm of edge collapse based on discrete curvature and VTK implementation[J]. Journal of Bengbu Medical University, 2015, 40(11): 1554-1557. DOI: 10.13898/j.cnki.issn.1000-2200.2015.11.031
    shu

    离散曲率边折叠简化算法用于骨骼CT图像三维重建及VTK实现

    The three-dimensional reconstruction of bone CT image using simplification algorithm of edge collapse based on discrete curvature and VTK implementation

      摘要
    • 摘要: 目的:验证离散曲率边折叠算法对骨骼CT图像三维模型的可行性与简化率。方法:利用离散曲率边折叠的网格简化技术,先将模型中需折叠的顶点进行分类,计算出平均离散曲率,随后采用蝶形分子规则产生新点,再进行边折叠操作,最后利用VTK与VS2008软件进行编程。结果:利用代码实现三维骨骼模型的重建。原始算法与简化后模型的三角面片数(个数)分别为253741和86597,简化率达74.05%;而原始算法与简化后模型的建模时间(ms)分别为86597和25763,建模时间缩短70.25%。结论:简化后的模型能较好保持原始性状特征,且其数据量大大减少,算法的可行性和简化率达到预期效果。

       

      Abstract: Objective: To explore the feasibility and simplify rate of the simplification algorithm of edge collapse based on discrete curvature in the three-dimensional model of bone CT images.Methods: The average discrete curvature was calculated in the basis of classifing fold vertices of the model using discrete curvature of edge collapse techolog.The new point was generated using the butterfly molecular rule,edge collapse was implemented,and programming was designed using VTK and VS2008 software.Results: The three-dimensional bone model was reconstructed.The number of triangle facet of original and simplified algorithm were 253741 and 86597,respectively,the simplification rate of which was 74.05%.The modeling time of the original and simplified algorithm were 86597 ms and 25763 ms,respectively,and which shortened 70.25%.Conclusions: The simplified model can better maintain the original characteristics,and the data volume is greatly reduced.The feasibility and simplified rate of algorithm achieve the expectation effect.

       

      • HTML全文
      • 参考文献(11)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回